Double Glazing Seal Repairs
If the seals of double-glazed windows are damaged, they can cause damp and mould. This can cause damage to the frame and the walls surrounding it, and also affecting your health.
Fortunately, resealing is a cheaper way to repair the majority of uPVC window frames than replacing them. A glazier can clean the frame and the glass of the window. They will apply a fresh bead and smooth it.
Water Leaks
Window seals are made to prevent water to stay out of your home. But, when they begin to wear down, it could result in water leaks around your windows. A leaking window annoying, but it can cause significant damage to the structure of your home. It's important to identify the issue early and get it repaired by an expert before it gets any worse.
The source of leaking windows is usually not in the glass but on the frame or sill. A leak in this region is the most frequent indication of a failing window seal. It could be due to damage to the seal due to weather or age wear-out caulking, or even a blocked drain that results in the accumulation of water or ice.
The appearance of water between double-glazed panes can be a indication that your window seal has failed. This is not as dangerous as a leak of water because the water does not travel far enough to get into your home. However, it could indicate that the inert gas that is sandwiched between the panes of glass has been released, which can reduce the insulation value of your windows.
Condensation between the panes is another typical indication of a damaged seal. It could be due to the seal being damaged or a damp atmosphere within your home. It could also be due to a problem with the glass. The condensation might not just be unpleasant, but it could also cause the growth of mold and mildew within your home, which is very difficult and expensive to remove.
If you're noticing these indications, it's time to conduct an inspection of your double-glazed windows. The repair or replacement of your windows will help protect your home from water leaks, reduce the cost of energy and reduce draughts. It's a small cost to pay for your family's security and comfort. Contact Thompson Creek Window today to discuss your options for a window seal repair or replacement. Our experts are always available to assist! We provide assistance to homeowners throughout the Mid-Atlantic region.
Condensation
A broken seal for double glazing can allow water into the insulating gap. This water could cause fogging or misting to the window panes.
If you notice condensation inside your home you should contact an expert in double glazing repair. The condensation could be a sign that the vacuum seal made in the factory has failed and water has gotten into the insulated space.
Condensation can be caused by a variety of reasons, but it is typically the result of gaskets that are not properly fitted and sealants, as well as insulation within the uPVC frame of the windows. There are several options for double glazing seal repair, but it's important that the new seals are correctly size to ensure an ideal seal and a perfect fit.
Typically, the gaskets that are used to seal the gaps between double-glazed units are constructed from a material such as polyurethane foam. They are designed to last for a long time but they are susceptible to deterioration as time passes due to wear and tear, as well as exposure to different temperatures and weather conditions throughout the year.
Over time, the foam may shrink or crack over time. This can lead to cracks in your seal and allow moisture to seep into the double-glazed window. This can result in condensation and decrease in energy efficiency.
Re-sealing windows is one option to address this issue. This is not a guaranteed fix as it will only remove the existing condensation, and not address the underlying problems that cause the double-glazed window to leak or create condensate.
A professional who is able to provide an insurance-backed guarantee should replace your windows in full. This means that in the event that the company fails or goes bust you'll still be protected by the insurance. It is important to note that the warranty on your replacement windows should be at least 10 years.
Misting
As autumn draws nearer, it's a good idea to make sure that your double glazing seals are in good condition. The damaged seals on your windows don't just affect the insulation properties of your windows, but can also cause damp, mold and condensation. It's important to fix any problems in your double-glazed windows as soon as you can to avoid further damage and save on energy bills.
Double-glazed windows are constructed of two panes glass that are joined by a gas-filled inner space. The outer sealant layer fills the gap between uPVC frames and the glass. This is essential to maintain the air-tight seal that keeps cold and warm air separate in your home, thereby saving money on your heating bill. However, over time, these seals can fail due to age, weather conditions or even inadequate installation. The magic insulation formula which makes double-glazed windows so efficient can start to lose its effectiveness when this occurs.
If left unchecked, damaged or faulty seals can cause condensation and damp which can not only affect the appearance of your windows, but can also impact your health. The presence of mould and damp can cause damage to your walls, floors and ceilings, but also create allergens and irritants in your home that can be harmful to you and your family's health.
One of the most frequent problems that can happen to your double glazing is the possibility of misting in between the panes. This occurs when moisture gets into the insulated area of your window and is quite difficult to resolve without expert help with repair of your seal.
DIY solutions to this issue are available, but we do not recommend them as they can be messy and can damage your windows. These methods involve drilling holes into your glass units and then using chemicals to get rid of the fog & condensation. This can cause various problems and, in particular, expose your windows to water damage, which could ruin the unit completely.
Professional glaziers have the expertise, tools and experience needed to effectively reseal your uPVC frames and give you lasting results. Not to mention they can also give advice on the best ways to maintain your uPVC windows to avoid future issues.
Draughts
A draft that is coming from your window is a sign that the sealant could have deteriorated. It needs to be repaired or replaced. This will prevent cold air getting into your home, improve energy efficiency and lower heating bills and make a difference to comfort levels and indoor temperature control.
It is important to know that some draughts aren't caused by the window seals but rather the gap between the bricks' frames. In some cases it may be possible to fix this by caulking the gap. If this doesn't work, you'll require having the seal professionally repaired.
When the sealant around double-glazed windows starts to breakdown, it allows water ingress. This can cause dampness or even mold. This could cause a negative impact on health and may be damaging to your property. It is essential to address any water leaks as soon as you spot them. If your windows are still in warranty, it is advisable to check with the company you purchased them from, as they might pay for the repairs.
It is worth checking whether the windows are covered under a warranty. window repair Wisbech offer lifetime guarantees and others offer 10 years. If your double-glazed windows are covered by a warranty, you should consider contact the company you bought the windows from as soon as possible and providing them with details of any issues you are having. It is recommended to contact the company in person, or by letter and email. This will ensure that everything is recorded and clear.
Also, it is worth noting that draughts can be typically caused by defective hinges, not a lack effective seals. The hinges are located close to the window sash which is the part that you open. If they're not regularly oiling them they could become stiff. This could leave a gap between the frame and the sash and allow cold air to enter. Replacing the hinges can solve this problem without affecting the window seals.